What are the Different Types of Barn Door Hinges?

What are the Different Types of Barn Door Hinges?

When it comes to choosing from the barn door hinges, then there are plenty of things that you need to consider. Hinge is one of the accessories used in the barn door. There are different types of hinges that are used in the cabinets and entryways. When it comes to reviewing barn door hinges, then there are three main and widely popular choices.

Here, in this article, you will get to know about the different types of barn door hinges. Have a look at the following three main types of hinges that can be used on the barn door. 

  1. Butt Hinges

It is one of the durable and permanent types of hinges. The butt hinges can be used on interior and exterior doors. The butt hinge is made up of two similar metal plates which are integrated by the pin and barrel system.

One plate of hinge is integrated with the interior side of the door and another side of the hinge is attached with the door jamb. After the proper installation, only the pin and barrel are exposed when you close the door. It will help preserve the face of the door. On the other hand, you can also install the dummy strap across the face of the door.

It will help in providing a bit more character to the door. Also, it will give traditional aesthetics to your door. It is really common for those homeowners who are looking for the installation of gate hinges. The beautiful door hinges can help in improving the curb appeal of their property.  

2. Strap Hinges

The strap hinges are named so because they look like straps. The strap hinges are widely used in the barn doors. These hinges are mostly used in the carriage house barn doors. The carriage doors make the front side of the carriage house beautiful. Nowadays, strap hinges are widely used for garages. The garages are the modern version of the carriage house.

The strap hinges of the barn door are available in different lengths, materials and with different load-bearing abilities. You have to choose the one that is suitable for your door. When it comes to choosing the material of the barn door hinge, the most commonly used material is iron. The iron strap hinge looks attractive on the wooden barn doors.

3. Tee Hinges

These hinges are just like the strap hinge and they are named because these hinges are available in T-shape. The best combination is the integration of the strap hinge with the butt hinge. When the barn door is closed, then these hinges take the horizontal t-shape.

The T-hinges are also used on the gates and carriage garage doors. But these hinges can also be used in the interior doors. The strap hinge and T-hinge are aesthetically pleasing. These are excellent and durable options.

Tips to Install Barn Door Hinges: 

After deciding the type of hinge that you want to install in your barn door, the next step is to start collecting the required material that you want to install on the barn door hinge. No matter what kind of hinge you want to choose, the installation process will be similar for all categories. Here, we have described steps for installation of barn door hinges:

  • Collect Required Tools

Before starting the installation process, you should start collecting the important tools required. You will need a pencil, screwdriver, screw, chisel, hammer, and chisel. You should keep all these things around the door so that you do not have to go to the storeroom to get the supplies.

  • Measure

Mostly, it is required to install three hinges on the gate. If the size of the gate is small, then you may need a few for the installation process. It is important to make sure that the top hinge is approximately 5 inches from the top of your door. You should precisely measure it. The middle hinge should have an equal distance from the top and bottom as well. It is recommended to start from the top.

  • Pre-Drill Holes

You should place the hinge plates on the mortised area. You should mark the hole with the help of a pencil. Drill the holes on the marked location with the help of the drill bits.

  • Align Hinge

After drilling the holes, you have to insert the screws by using the drill and screwdriver. It is a good idea to leave your screw a little loose until all the plates are properly aligned. After that, you should return and tighten up the screws. The hinges are installed on the face of the door. After hanging the door, you can move to the next stage. You should consider the installation of doorknobs and latches.

Leave a Reply

Your email address will not be published. Required fields are marked *