Ever have a clog in your drain? You are not alone. Sometimes the most basic of tasks can be frustrating, especially when it comes to plumbing. There is an easy solution, though. If you want to snake your drain, some simple steps will lead you through the process. This blog post will walk you through how to snake your own drain so that you no longer have this pesky problem on your hands. Follow these steps and watch as your pipes never clog again!
Steps to Follow to snake your drain
- Find a snake that is the right size for your drain
Make sure you get the properly sized snake for your drain. If it is too big or too small, it won’t do its job and help remove the clog (which means more work and frustration for you.
- Clear your drain of water
Before you start using the snake, it is important to make sure there is no water in your sink or tub to easily see what is going on with the clog and where it is coming from. Also, if there is still water in your sink after removing it with a wet rag or towel, you can easily get hurt by slipping.
- Pour a small amount of water into the drain to create suction
You need to pour a small amount of water into the drain and wait about 30 seconds for the water to be sucked down. This will create suction so that you can insert your snake without having to worry about remnants of what you are trying to remove, blocking it from going any further.
- Insert the snake down the drain
Now that your drain is cleared of water, you are ready to insert the snake into the pipe. You may need someone to hold it for you if there is no stopper or something similar to hold onto. While one person holds onto the snake’s handle at the top, another can begin to feed it down the drain where the clog is. You mustn’t see any water coming out of your sink at this point, as the snake will do the dirty work for you!
- Feed and turn the handle of the snake as needed
Don’t try to force anything with the snake if it is not going down easily. Please give it a little bit of time to wiggle its way through the clog and break up any substances that might be blocking your drains, such as hair or gunk. Make sure you turn the handle in both clockwise and counterclockwise movements. If you don’t do this part correctly, it could get jammed or stuck.
- Continue to feed your snake until you reach the clog
If something is not working, it might be time to call a professional Toronto plumbers who can care for your needs professionally and efficiently. There’s no need to make this job harder than it needs to be! Just follow these simple steps, and there should be no trouble.
- Remove the snake once you have broken up the clog
Once your snake has done its job and clogged substances are removed, carefully pull it back out of the drain. Now that your sink or tub is free from hair or another build-up, you should notice a huge difference in how well your water goes down. If you are still noticing some clogging, repeat the steps above until it is clear!
- Flush your drain with hot water to rinse out any debris
Run your sink or tub for a few minutes after sneaking to get all of the gunk, hair, etc., out of your line by flushing it with hot water. You will notice that your sink or tub is draining much better than before. If it is still draining slowly, give the steps a try again until you notice the results.
- Carefully pour cold water down the drain to seal any cracks or crevices
If you notice that your water is soon draining slowly, it might be time to get your pipes checked for cracks or crevices. Pour cold water down the drain to seal any that may be present so that it will not allow anything through where there shouldn’t be. This should help to ensure a faster flow of water in your sink or tub.
- If this doesn’t work, contact a professional plumber to snake your drain
If you notice that your sink or tub is not draining properly after following the steps above, there might be something else going on that you are just not seeing right off the bat. It could mean that it needs to be snaked again, but this time with a professional who has more experience doing it than you do. Give a call to Toronto plumbers and set up a time for them to look at what might be causing this problem with your pipes.
Now that you know how to effectively snake your own drain at home, there is no reason why you should ever have to face this problem again. Just follow these steps, and you should notice a huge difference in how well it goes down. If you are still noticing some clogging, repeat the steps above until it is clear. Make sure to call Toronto plumbers if all else fails so that your pipes can be repaired or replaced if needed.